全自動蓋板玻璃絲印機重要組件說明
全自動蓋板玻璃絲印機重要組件說明
初定位:采用6點定位,初定位X方向用電機驅動皮帶結構實現夾持產品,Y方向用絲桿電機
驅動實現夾持產品,無升降結構,不用凸輪隨動器與玻璃接觸,直接用賽剛做的頂
柱代替。
精定位:采用8點定位,精定位X、Y方向都用電機驅動皮帶結構實現夾持產品,有2個薄型氣
缸驅動精定位升降,用凸輪隨動器與玻璃接觸,實現重復精確定位;精定位整體位
置調(實現X、Y、θ方向調節)采用手動調節手柄,再通過校對百分表進行精確調節。
大機械手:采用雙電機,雙取放料機械手,及導軌錯開排列實現兩個機械手單獨工作,互不
影響,工作效率提高。
精密凸輪隨動器:滾動摩擦降低阻力、定位準確、無劃傷產品。
頂升氣缸:實現整個精定位升降。
手柄:當精定位整體位置調好后,需用它鎖緊,防止精定位移動,影響印刷精度。
取料手臂:采用精密滑臺氣缸作動力,真空作用于風琴吸盤上,從粗定位抓取待印刷的產品
放送至精定位。
放料手臂:采用精密滑臺氣缸作動力,真空作用于風琴吸盤上,從精定位抓取印刷好產品放
回至產品出料輸送帶上面。
印刷組件:采用與半自動印刷機相同的配重塊結構、立柱橫梁結構、機頭結構、機械手橫梁
結構、網框夾結構實現印刷功能,該組件與機架做成一體,不需單獨調節和對機,
操作方便簡單,結構也節湊。
高度調整: 取、放料手臂在需要的情況下,兩支吸筆的高度需要調整:松開鎖緊螺母,使兩
支吸筆橡膠吸附面在同一狀態、同一平面且等高,然后鎖緊螺母。